E60Vi Controlled Viscosity Molding (CVM) System Parameters
| Clamp Section | Units | Value |
|---|---|---|
| Clamping | US Ton (kN) | 10 (98) |
| Clamping Equivalency | US Ton (kN) | 60 (588) |
| Opening Stroke | in (mm) | 8.0 (203.2) |
| Upper Platen Size | in (mm) | 12 x 14 (355 x 305) |
| Rotary Platen Diameter | in (mm) | 32 (813) |
| Minimum Mold Height | in (mm) | 6 (152.4) |
| Maximum Daylight | in (mm) | 14 (355.6) |
| Extruder Elevation from the Table | in (mm) | 4-10 (101.6 – 254) |
| Ejection Stroke | in (mm) | 4 (101.6) |
| Ejection Force | US Ton (kN) | 1.6 (16) |
| Mold Location – Upper | in (mm) | Ø4 (101.6) |
| Ejection Configuration | – | 1 – Center |
| Machine Functions | Units | Value |
|---|---|---|
| Maximum Extruder Capacity | cc/sec (PS) | 0 – 100 |
| System Hydraulic Pressure | psi (bar) | 2400 (165) |
| Power Requirements | volts / amps | 208 – 240 – 3Phase / 50 |
| Servo Hydraulic Motor | kW | 5 |
| Screw Drive Servo | kW | 1 |
| Rotary Table Servo | kW | 2 |
| Heater Power | W | 3300 |
| Number of Heat Zones | – | 8 |
| Machine Dimensions (L x W x H) | in (cm) | 93x45x79 (236x114x200) |
| Machine Weight | lbs (kg) | 2900 (1300) |
| Automation Integration | Euromap 67 |